FZK 011 Electronic Thermostat
| Model | FZK 011 |
| witching difference | approx. 9 °F (5 K), tolerance -5.4/+3.6 °F (-3/+2 K)1 |
| Sensor element | thermostatic bimetal |
| Contact type | SPDT / change-over contact |
| Service life | > 100,000 cycles |
| Min. switching capacity | 10 mA |
| Max. switching capacity, NC | 10 A resistive / 4 A inductive @ AC 120 V 10 A resistive / 4 A inductive @ AC 250 V DC 30 W |
| Max. switching capacity, NO | 5 A resistive / 2 A inductive @ AC 120 V 5 A resistive / 2 A inductive @ AC 250 V DC 30W |
| Connection² | 4-pole terminal, clamping torque 0.5 Nm max.: solid/stranded² wire – AWG 14 max. (2.5 mm²) |
| Housing | plastic, UL 94V-0, light grey |
| Mounting | clip for 35 mm DIN rail, EN 60715 |
| Mounting position | variable |
| Operating / Storage temperature | -49 to +149 °F (-45 to +65 °C) |
| Operating / Storage humidity | max. 90 %RH (non-condensing) |
| Dimensions | 2.64 x 1.97 x 1.5” (67 x 50 x 38 mm) |
| Weight | approx. 2 oz. (60 g) |
| Protection type | IP20 |
| Approvals | UL File No. E164102, EAC |
If the Normally Closed contact is used, the switch temperature difference could be reduced by connecting terminal “N” (RF heating resistor). It causes the thermal feedback which is subject to surrounding conditions and thus has to be determined for each individual application.
When connecting with stranded wires, wire end ferrules must be used.
Important note: The contact system of the regulator is subjected to environmental influences, thus the contact resistance may change. This can lead to a voltage drop and/or self-heating of the contacts.
Product specification
| Part No. | Operating voltage | Setting range |
| 01170.0-00 | AC 230 V | 5 to 60 °C |
| 01170.0-01 | AC 230 V | 40 to 140 °F |
| 01170.9-00 | AC 120 V | 40 to 140 °F |
| 01170.9-01 | AC 120 V | 5 to 60 °C |
Technical Drawing
 |
The FZK 011 mechanical thermostat is used for controlling heating and cooling equipment, filter fans or signal devices where a higher degree of sensing accuracy is required. An integrated resistor (RF) can be connected to improve the switch temperature difference (see Option note). The thermostat registers the surrounding air and can switch both inductive and resistive loads via snap-action contact. |
Product Features
1. Wide adjustment range
2. High switching capacity
3. SPDT (change-over) contact
4. Very low hysteresis option
5. DIN rail mountable
Application
Suitable for enclosures, switch cabinets or other enclosed Spaces that require temperature control.
FAQ
| A. What’s your shipment method?A: We ship by Express, by air, by sea, Normally we checked and compare, then provide customer the most proper shipment method.B: What’s your payment terms?A: Order amount more than USD$10000, we usual accept 30% T/T payment in advance, and the balance payment before shipment, terms could change according to our business relationship. Less rhan USD$10000, the payment will be 100% T/T in advance.C. How to order our product?
A:1).Please tell us the model and quantity and other request you need. 2).We make the PI for you. 3).After you confirm the PI, we arrange the order for you after receiving your payment. 4).After the goods finished, we send the goods out to you and tell you the tracking number. 5).We will track your goods until you receive the goods. D. Can we do OEM brand on the product? A:Yes, OEM is available for brands and package based on our MOQ. E. How can I get product catalogs? A:You can download our waterproof box catalog on our website, and you can may request a catalog via e-mail at saip@saipwell.com F. How many employees in your factory? A:There are more than 200 people in our factory.
|
