ETF 012 Electronic Hygrothermostat

Short Description:

Temperature and humidity adjustable

Optical operating display (LED)

High switching capacity

DIN rail mounted


Product Detail

FAQ

Product Tags

Features

Temperature and humidity adjustable
Optical operating display (LED)
High switching capacity
DIN rail mounted

The electronic hygrotherm senses the ambient temperature and relative humidity in an enclosure with electric/electronic components and turns on a heater(or alterna- tively a fan)at either set point,helping prevent the formation of condensation in the enclosure.Due to its wide voltage range the hygrotherm can be utilised anywhere in the world  The LED integrated in the adjustment knob on the active controller is lit when the connected device is in operation

Technical Data
Switch temperature difference 2K (±1K tolerance)at 2S°Cm°V (50% RH)
Switch difference(humidity) 4% RH ( ± 1% tolerance) at 25°C /770 F (50% RH)
Reaction time (humidity) approx. 5 sec.
Contact type change-over contact (relay)
Contact resistance < 10mQ
Service life NC: > 50,000 cycles
NO: > 100,000 cycles
Max. Switching capacity(Relay output) NC: 240VAC, 6(1) A NO: 240VAC, 8 (1.6) A
NC: 120VAC, 6(1) A NO: 120VAC, 8(1.6) A
24VDC,4A
EMC acc. to EN 55014-1-2, EN 61000-3-2, EN 61000-3-3
Optical indicator LED
Connection 5-pole terminal,damping torque 0.5Nm max.:rigid yvire 2.5mm2 stranded wire (with wire end ferrule) 1.5mm’
Mounting clip for 35mm DIN rail,EN6075 or for exit filter EF 118 Series
Casing plastic according to UL94 V-0, light grey
Dimensions 77 x 60 x 43mm
Weight approx. 0.20kg
Installation position  vertical
Operating/Storage temperature 0 to +60°C (+32 to +140° F ) / -20 to +80°C (-4 to +176° F)
Protection type IP20
Art.No Operating voltage
01230.0-00 230VAC,50/60HZ(min.90VAC,max.265VAC)
01230.9-00 120VAC,50/60HZ(min.90VAC,max.265VAC)
01230.9-01 120VAC,50/60HZ(min.20VAC,max.60VAC)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


  • Previous:
  • Next:

  • Write your message here and send it to us