CSF 060 Touch-Safe Heater
CSF 060 50W-150W Features
Low surface temperature
DIN rail mounted
Doble insulated (plastic)
Wide voltage range
Small size
Integrated thermostat
Touch-safe heater for the use in enclosures with electrical/electronical components. The design of the heater supports the natural convection which results in a high air-current of warm air. The surface temperatures on the accessible side surfaces of the housing are kept down as a result of the heater design. This model with plug-in thermostat does not require additional wiring. The heaters are designed for perm-anent operation. This heater is also available in a version without thermostat(CS 060).
Technical Data
| Operating voltage 120-240V | AC/DC*(min.110V,max.265V) |
| Heating capacity | see table |
| Heater element | PTC resistor-temperature limiting <80℃(176° F) |
| Surface temperature | <80℃(176°F) ,except upper protective grille |
| Connection | 4-pole terminal 2.5mm ,torpue 0.8Nm max. |
| Casing | Plastic according to UL94-V-0,black |
| Mounting | clip for 35mm DIN rail,EN 50022 |
| Installation position | Vertical |
| Operating/storage tmperature | -20 to+70℃(-4 to +158°F)/-45 to +70℃(-49 to +158°F) |
| Ptotection type/Protection class | IP20/II (double insulated) |
| Approvals | VDE+UL File No.E15057(according to UL499 in combination with UL508A) |
| Note | other voltages on request |
Write your message here and send it to us
