Airflow Monitor Switch
Technical Data
|
Model |
LC 013/LCF 013 |
|
Contact type |
Reed/magnet contact |
|
Normally Closed (NC) |
switch contact open when air is flowing |
|
Normally Open (NO) |
switch contact closed when air is flowing |
|
Max. switching voltage |
NC: 240VDC (UL), 240V AC/DC (VDE) / NO: 60VDC |
|
Max. switching current |
NC: DC 500mA / NO: DC 170mA |
|
Max. switching capacity |
10W (resistive load) |
|
Switching threshold of airflow velocity |
> 2.5m/s (hysteresis: > 1m/s) |
|
Max. airflow velocity |
50m/s |
|
Contact resistance |
< 370mÙ (with wire) |
|
Max. air humidity |
70% RH (not precipitating) |
|
Service life |
> 100,000 cycles |
|
Connection |
2 x single strand AWG 26, length 500 mm, tip of stranded |
|
Mounting |
alternatively integrated in protective grille (see table),mounting clamp or mounting clip |
|
Casing plastic |
according to UL94-HB, black |
|
Fitting position |
bidirectional tab perpendicular to airflow |
|
Operating / Storage temperature |
-20 to +50°C (-4 to +122°F) / -20 to +80°C (-4 to +176°F) |
|
Protection type |
IP20 |
|
Approvals |
CE/ROHS |
Note: The product of switching voltage and switching current must not exceed 10W. The max. voltage and max. current must not be exceeded, not even short-term (voltage/current peaks). The resulting voltage and current peaks of inductive or capacitive loads must be restricted by a contact protection circuit.
Product specification
|
Description |
Art. No. (NC) |
Art. No. (NO) |
Dimensions |
Weight |
|
Airflow monitor with mounting clamp and mounting clip LC 013 |
01300.0-00 |
01300.1-00 |
34 x 17.5 x 7.5mm |
50g |
|
Airflow monitor integrated in protective grille (plastic) LCF 013 |
01301.0-00 |
01301.1-00 |
80 x 88 x 10.5mm |
20g |
|
01302.0-00 |
01302.1-00 |
92 x 92 x 10mm |
20g |
|
|
01303.0-00 |
01303.1-00 |
120 x 120 x 10mm |
30g |
Technical drawing
Installation notes:
1. The airflow monitor must not be installed in the impact range of permanent magnets or ferrous metals as the built-in permanent magnet will move unintentionally and consequently can not move in dependence with the air flow.
2. A suitable distance from electromagnetic fields, e.g. generated by transformers, motors, etc., must be maintained as otherwise the contact may switch incorrectly with the frequency of the power supply. Interferences must be checked with an oscillograph and the mounting position of the airflow monitor should be adjusted if necessary.
3. Avoid installing the airflow monitors in areas where air pockets or turbulence can be expected.
4. Ambient air with a high dust content should be avoided.
As there are many different conditions of use, suitability of this product must be assessed by the end user in its final application.
The Airflow Monitor is a mechanical switch, designed to monitor the cooling fans in cabinets and enclosures containing electric or electronic components. It uses a surprisingly simple operating principle and offers superior functionality at low cost.
Product Features
1. Effective solution without costly electronics
2. Dependable mechanical operating principle
3. Direct monitoring of the cooling air
4. Extremely compact dimensions
5. Versatile mounting options
6. Indication of malfunctions or correct operation
Application
The LC 013 is used as a signal contact to monitor fans or filter fans in stationary, self-contained Protection Class I enclosures. It can be connected to monitoring systems with remote control or can directly switch alarm devices, such as LED’s or signal lamps. Loads with capacities exceeding the indicated switching capacity must be switched via a relay, e.g. our electronic relay SM 010. The airflow monitor with NC contact closes upon loss of air movement, i.e. it indicates fan failure (e.g. red signal lamp). The NO contact closes when fan is in operation and serves as optical function display (e.g. green signal lamp).
FAQ
A. What is your delivery time?
A:Usually, 3-7days for samples, 10-30 days for bulk goods.
B: How do you control the quality?
A:100% Auto inspection machine and manual testing together before packing.
C. Can I get a waterproof sample for reference?
A:we are glad to send samples for your testing, but you need to pay the express cost.
D. What is the MOQ?
A: No limit, if you order different quantity, the price is different.
E. What’s your main market?
A:Our market allover the world, main market in Europe and America.
F. May I have your catalogue?
A: Yes ,E-catalog could be sent to your E-mail. Or we would put the catalog into your goods.
